Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This pulley is a lot smaller than a stock pulley.
This pulley is a lot smaller than a stock pulley. It turns the generator pulley slower, in turn giving you more horsepower. By turning the generator pulley slower you are turning the fan slower, losing some of your cooling. If your engine is always turning high RPMs then you can get away with this pulley. If not then don't run it.
Race/Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: 311105273ACO
These flywheels have been reconditioned and are sold on an exchange basis.
Application:Part #: JC86130
Jaycee Billet 5.25" Crank Pulley for Offroad Cars, Black
Application:Part #: JC86120
Jaycee Billet 5.25" Crank Pulley for Offroad Cars, Red
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 1105401SC
Scat Connecting Rods "H" 5.500 Chromoly
Application:Part #: 111105227
Retaining Clip, 1200-1600cc
Application:Part #: JC86140
Jaycee Billet 5.25" Crank Pulley for Offroad Cars, Blue
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 111105401EMP
New Connecting Rods, 13-1600cc, Set of 4
Application:Part #: 1105253BK
This is a crank pulley for an upright motor.
Application:Part #: 1105257
This is a billet, zinc plated crankshaft pulley bolt that has a 3/8" drive hole broached into the center.
Application:Part #: 1105251CH
This is a stock pulley that has been chromed.
Application:Part #: 1105261
Adjustable Timing Pointer
Application:Part #: 1105258
This is a stock, zinc-plated crankshaft pulley bolt that has a 3/8" drive hole broached into the center.
Application:Part #: 1105278
Here are some flywheel pins that give you more contact surface on the flywheel.
Application:Part #: 1105721
Chevy Rod Bearings .010
Application:
This pulley is a lot smaller than a stock pulley.
