Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Replacement Oil Cap Billet Black
Replacement Oil Cap Billet Black
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
Race/Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: 1115109
This oil thermostat goes in line on your external oil cooler system.
Application:Part #: JC22660
Jaycee Street Oil Filter Bracket, Black
Application:Part #: 1117024
Mesa coolers are the state of the art oil coolers.
Application:Part #: 1115464
This air filter is made to protect the crankcase.
Application:Part #: 111115131A
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1117699
When mounting the oil cooler above the transmission on a Bug, Type 3, Ghia, Thing, or Off Road car you can use these rubber mounted studs.
Application:Part #: 1117106ALM
These fittings are used for the stainless steel hose.
Application:Part #: 1115349
This plate will block off the type 3 oil filler hole in a universal case.
Application:Part #: 1115351BUL
This is the last oil filter you will ever buy.
Application:Part #: 040101149
Oil pick up Pipe
Application:Part #: 1117108
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 113117021
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 1115457
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily.
Application:Part #: 113115611
No, this isn't that distant cousin.
Application:Part #: 113115451D
Oil Filler with Tube
Application:Part #: 111115451
This rubber collar goes around the dump tube that comes from the generator stand.
Application:
Replacement Oil Cap Billet Black
