Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Fender Weld Nuts, 8mm, 10 pieces Late Style
Fender Weld Nuts, 8mm, 10 pieces
No customer reviews for the moment.
Part #: 211941511D
This switch turns on the headlights, as well as, dims the dash lights.
Application:Part #: 211947107AWW
Dome Light Bulb Holder
Application:Part #: 1117007SS
This is the high-temp/pressure hose wrapped with braided stainless steel.
Application:Part #: 113101353ERB
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld). Due to a shortage of cores we will need your Cylinder head Cores before sending any Rebuilt heads.
Application:Part #: 111953193E
This seals the front turn signal housing from the fender.
Application:Part #: 211845521CAM
This seal is for the rear window.
Application:Part #: 1615115
Rear Disc Brake Kit W/O E-Brake, 5x130 w/ 14x1.5mm threads or 5x4.75" w/ 12mm threads, Swing Axle
Application:Part #: 111971015
The electrical harness runs everything on the car. This is just the Main harness that goes front to rear. Does NOT have any of the front wires in it.
Application:Part #: 211945321
Center Brake Light Lens Seal
Application:Part #: 113198026
This kit contains a bushing, a clutch return spring and the retaining clips to install the throw-out bearing shaft in the transmission.
Application:Part #: 6801198
Threaded bung, 3/4"-16 LH, 1"x.120, 2 3/8" Long
Application:Part #: 211405668
Pair of Spindle Nuts
Application:Part #: 113415979
These boots cover the u-joints on your Super Beetle.
Application:Part #: 111198157B
Rings on the pistons are there to eliminate "blow-by".
Application:Part #: 151871100
Convertible Top Frame Butt Plates
Application:Part #: 251837205
These are the front door handles.
Application:
Fender Weld Nuts, 8mm, 10 pieces Late Style