Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
When you mount the middle seat, you'll want the rubber mat down and the bolts in the key slots first. Then place the mounting plates into the holes of the mat. Now place the seat on the plates and slide the hooks over the bolts and thread the nuts down and tighten them. The rear seat doesn't sit on a mat so you don't use the mounting plates, just the hooks and nuts.
Bus (Type 2): 55-67
No customer reviews for the moment.
Part #: N161371
When you mount the middle seat, you'll want the rubber mat down and the bolts in the key slots first.
Application:Part #: 111881281
When you mount the middle seat, you'll want the rubber mat down and the bolts in the key slots first.
Application:Part #: 111881285
When you mount the middle seat, you'll want the rubber mat down and the bolts in the key slots first.
Application:Part #: 1127022RD
Billet Fuel Pump Block off, Red
Application:Part #: 111201261
Fuel Breather Hose Clip
Application:Part #: 1301048I
Padded Trans Support Front Kit
Application:Part #: 6821510
High Mount Baja Bars, 3/4" tube, High mount is approximately half way up Quarter Panel
Application:Part #: 1609721LON
This kit allows you to run disc brakes in the rear.
Application:Part #: 211881375
This is the padding that sits on top of the springs of the seat.
Application:Part #: 6707301
These bumpers are made for Baja Bugs.
Application:Part #: 111707121
These are the brackets that hold the bumpers on.
Application:Part #: 151871425
Convertible Top Boot Hook
Application:Part #: 2070276
Bus (Type 2) Tubular Roof Rack
Application:Part #: 111398005A
This kit contains all of the gaskets needed to rebuild a transmission.
Application:Part #: JC22220
Jaycee Billet Oil Cap with Breater #8 AN Fitting, Black
Application:Part #: 021101403A
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: 61296144BK
IDF air cleaner shield.
Application:Offroad; All
Part #: 6405126
Urethane Rectangle Bump Stop, Pair
Application:Part #: 211898003
Bus Ignition, 2 front locking door handles, and cargo door (Not Panel) all keyed alike, only 2 keys included!
Application: