Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Sunroof Slide Guide Kit
Sunroof Slide Guide Kit
Bug (Type 1): 50-55
Bus (Type 2): 51-67
No customer reviews for the moment.
Part #: 6801231
Billet Bracket for 3/16" Brake Line, for 3/4" Tubing
Application:Part #: 1707135BBK
This is one of the original bumper options that was used on the first Cal-Look Bugs back in the 70's.
Application:Part #: 113853355CLP
Rear Window Trim Securing Clip
Application:Part #: 411837097
Chrome Plated Handle Escutcheon
Application:Part #: 113857050A
These are the padded dashes that came on the 1968 and later Bugs.
Application:Part #: 1115107FF
30mm Oil pump for Dual Relief & Flat cam Full Flowed Engines
Application:Part #: 211711149
This plate sits under the shifter to keep you from hitting reverse gear when you shift into 2nd.
Application:Part #: 1863620W
This basket fits perfectly on your carpeted console area. This is for those of you who FINALLY wanted a cup holder and/or a goodie basket. I
Application:Part #: 151871400
Convertible Top Chrome Molding Kit
Application:Part #: 113857219A
These are the clips that hold the various chrome moldings on. Sold each
Application:Bug (Type 1); Chrome molding seal 1950-1966, Door panel clip seal All
Ghia; All
Type 3; All
Off road: All
Part #: 111598000A
Spring Plate Hardware Kit
Application:Part #: JC23180
Jaycee Tapered Ring Compressor 96.9mm
Application:Part #: 311401301C
Lower Outer Needle Bearing For Front Beam (2 required)
Application:Part #: 211971028FC
Complete Wiring Harness
Application:Part #: 111251263A
Heat riser gasket.
Application:Part #: 2498211C
Do you have a lowered beam now? They should have come with a kidney belt and a mouth guard. These spindles will give you the stock ride and give you that lowered stance. They are sold on an exchange basis and come with new king pins. They do NOT come with link pins, so look at yours to see if you need new ones. Most of the time you do not need new ones...
Application:
Sunroof Slide Guide Kit