Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are just stock valve covers that are chrome.
These are just stock valve covers that are chrome. They are sold in pairs and come with chrome bails.
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Type 3: 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
Race/Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: 1101382
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 113101353ERB
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld). Due to a shortage of cores we will need your Cylinder head Cores before sending any Rebuilt heads.
Application:Part #: 1198161A
These rings are cast iron.
Application:Part #: 1101357
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1101386
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 11310140105
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: 1198162A
These rings are cast iron.
Application:Part #: 111198157BBB
Rings on the pistons are there to eliminate "blow-by".
Application:Part #: 11310140108
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: 111198157A
Rings on the pistons are there to eliminate "blow-by".
Application:Part #: 1198161
These rings are cast iron.
Application:Part #: N14402140
Some of the most common studs you might need. Stud 8mm x 40mm
Application:Part #: 1107434
Not our favorite type of piston pin keeps.
Application:Part #: 1198090A
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 111198157B
Rings on the pistons are there to eliminate "blow-by".
Application:Part #: 113101481F
This gasket goes between the valve cover and the head.
Application:
These are just stock valve covers that are chrome.
