Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
If you are going to play in the dirt and don't want to bend your spindles, this gusset kit will help strengthen them.
If you are going to play in the dirt and don't want to bend your spindles, this gusset kit will help strengthen them. Welding is required.
Off-Road: For K&L spindles
No customer reviews for the moment.
Part #: 175419341A
Steering Column Bearing Bushing, Upper
Application:Part #: 6415812B
Tapered Chromoly Bung, mainly used for fabricating Tie Rods on Offroad/Race Applications. Thread 3/4"-16 RH
Application:Part #: 113425117
It is for the steering damper. If yours is bad then the steering damper will be sloppy, rendering the damper useless. It will need to be pressed out and pressed in.
Application:Part #: 131415371B
Pitman Arm
Application:Part #: 111415417
This is a rubber "donut" that connects the steering shaft to the steering box.
Application:Part #: 6415619
This billet aluminum steering wheel is precision machined and finished polished for a real shine.
Application:Part #: 113415371
Steering box Pitman arm.
Application:Part #: 14156631A
3 Hole to 5 Hole Steering Wheel Adapter
Application:Part #: 113415821
These are the ball joints on the tie rods.
Application:Part #: 6415048B
This takes a turn and half out of your steering wheel.
Application:Part #: 6415050
This shaft is for the steering on tube style cars.
Application:Part #: 311415535
This is a plug that goes into the end of the steering shaft for the horn wire.
Application:Part #: 131415811
These are the ball joints on the tie rods.
Application:Part #: 1415667
This steering wheel is a very cheap steering wheel in comparison to the Leccara wheels.
Application:Part #: 6415616
This unit is used when you want to take the steering wheel off in a hurry.
Application:Part #: 131415802E
These two rods go from the center pin on a Bus or the pitman arm on a Bug, to the spindles, making the car turn.
Application:
If you are going to play in the dirt and don't want to bend your spindles, this gusset kit will help strengthen them.