Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N109052
Screws for replacement pop out window frames. These screws are for joining the two Popout frame halves together
Application:Valve seats are used in the big valve heads.
Valve seats are used in the big valve heads. So if you have big valve heads and need to replace the valve seats, this is what you will need. If you are planning on building your own big valve heads, we suggest you price out all the parts first, complete heads are usually cheaper. This is not an easy replacement. I good machine shop will have to do this for you.
No customer reviews for the moment.
Part #: 1109604
Valve seats are used in the big valve heads.
Application:Part #: 1107435
Not our favorite type of piston pin keeps.
Application:Part #: 111198157A
Rings on the pistons are there to eliminate "blow-by".
Application:Part #: 1198159
These rings are cast iron.
Application:Part #: N122412
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 1107433
Not our favorite type of piston pin keeps.
Application:Part #: 1101482
These covers look good but have a tendency to leak.
Application:Part #: 1101342
36 HP Barrel Shims .020 (4)
Application:Part #: 1101353
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1101355P
Here's another long subject, but it'll give you a little something to think about.
Application:Part #: 1107434
Not our favorite type of piston pin keeps.
Application:Part #: 113101355A
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 1198090B
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 1101383
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 311198169B92
Piston Ring Set 92mm
Application:Part #: 1101477
These covers look good but have a tendency to leak.
Application: