Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The cam rides in these bearings.
The cam rides in these bearings. We have tried German and Brazilian brands and have had good luck with both. If you are running a 1776cc or bigger engine you should run double thrust bearings. Note: The bearings are installed with the widest one towards the pulley and the narrowest one towards the flywheel. Use oil on the bearings before installing the cam.
Bus (Type 2): 1700-2000
No customer reviews for the moment.
Part #: 021109345A
These are the seals that go around the push rod tubes.
Application:Part #: 1109001
Engle cams are one of the most popular performance camshafts made for the air-cooled Volkswagen.
Application:Part #: JC91030
Jaycee Leak proof Pushrod Tubes, Blue
Application:Part #: 021109601
The two inside valves in the head are the intake valves, which let the gas into the combustion chamber.
Application:Part #: 1109401125SC
1.25 Ratio Rockers Pro SCAT
Application:Part #: 1109641
If you are going to run dual springs we suggest you use these valve spring retainers as well.
Application:Part #: 113109301D
These rods link the cam to the valves. These are very costly so please call for good used ones.
Application:Part #: 021109317C
These rods link the cam to the valves.
Application:Part #: 021109349B
These are the seals that go around the push rod tubes.
Application:Part #: 1109405
These shims are used with the Solid Shaft Rocker Kit.
Application:Part #: JC91000
Rebuild kit for Jaycee Leak proof Pushrod Tubes
Application:Part #: 1109601
These caps go on the ends of the valve.
Application:Part #: 113101401
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: 2109001
T4 Camshaft Gear, Bolt On
Application:Part #: 1109623
These are single heavy duty valve springs which are used on engines with Engle 110 or larger cams.
Application:Part #: 311109335
These tubes go from the case to the heads to house the push rods.
Application:
The cam rides in these bearings.
