Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Side Panel, Crew Cab Only, Left
Side Panel, Crew Cab Only, Left
Bus (Type 2): 66-67
No customer reviews for the moment.
Part #: 211707135A
Front Bumper Bracket, Left
Application:Part #: 1501623
Aluminum Wheel Spacer, Double Drilled 4x130 & 5x130; 1/2" Thick
Application:Part #: 151847366A
Window Sash for Rear Quarter Window, Right, Convertible
Application:Part #: 1107430
There are two types of keepers we like to use.
Application:Part #: 113609721J
These cables set the rear brakes.
Application:Part #: 111953193
This seals the front turn signal housing from the fender.
Application:Part #: 171881939
Headrest Post Guide, Each
Application:Part #: 6501204
IRS Axles for Type 2 Transmissions with 930 CV Joints or 3x3 Arms, Sold as a Pair
Application:Part #: 211971228A
This cable goes from the battery to the starter.
Application:Part #: 1721507BK
This gas pedal comes with a roller on the end of it.
Application:Part #: 211251053C
This is the exhaust silencer.
Application:Part #: 141853335A
The front door window rolls up and down between these two rubber seals.
Application:Part #: 111885589
These are the parts needed to hold the back of the rear seat up.
Application:Part #: 1251200
This kit comes with four flanges, two for the heater boxes and two for the header. Sold EACH, 2 required.
Application:Part #: 1105258
This is a stock, zinc-plated crankshaft pulley bolt that has a 3/8" drive hole broached into the center.
Application:
Side Panel, Crew Cab Only, Left
