Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is a full carpet kit.
This is a full carpet kit. The part numbers are just the basic numbers you will need to tell us; what color you want and what kind of material. There are three styles to choose from, Loop, Cut Pile, and Square Weave.
Color choices in Loop: Black, Brown, Salt and Pepper, Blue, Charcoal, Red, Saddle, Maroon, and Oatmeal.
Color choices in Cutpile: Black, Light Blue, Brown, Red, Saddle, Maroon, Grey, Royal Blue, Beige, and Silver.
Color choices in Square Weave: Oatmeal, Brown, Salt and Pepper, Black, and Red.
Prices can vary depending on style, color, and material.
All carpet kits for the Bug and Off-Road come with emergency brake and heater vent grommets sewn in. The deluxe kits for the Bug and Off-Road also include the shifter and heater control grommets. Brought to you proudly by TMI. Note: Buy a can of 3M spray adhesive. Pay attention when using this. Once it is stuck that's it.
Bug (Type 1): 65-67
No customer reviews for the moment.
Part #: 6615103A
Rear Rotor for Disc brake setup, 4x130 bolt pattern, 14x1.5mm threads
Application:Part #: 211201157A
Fuel Breather Hose at Tank
Application:Part #: 111809635E
Rear Bumper Mount, Brazilian Universal
Application:Part #: 144863704
This is a full carpet kit.
Application:Part #: 1881406CU
Like the custom door panels these car seat covers are a great way to customize the interior of your Bug.
Application:Part #: 141809631
This plug is in the side of the body.
Application:Part #: 1601153
Replacement Cap, EMPI Logo, Push-On Chrome, 5/8" Inside Height
Application:Part #: 1615109SWG
This kit allows you to run disc brakes in the rear.
Application:Part #: 113837640A
These locks keep the vent wing closed, therefore a must, but they're a pain to replace.
Application:Part #: 2251006CC
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: N113081
Some of the more common nuts you might need..
Application:Part #: 1401061A
2" Narrowed Beam with Ratchet Style Adjusters, Link Pin
Application:Part #: 6823496
These fasteners take some time to put in, but they're worth the effort. Formed Tab w/ 3/8"-24 Nutplate
Application:Part #: 241877305
These are all of the parts that we can get our hands on for metal sunroof bugs.
Application:Part #: 113711141IV
This is the knob on top of the shifter..
Application:Part #: 111953041MT
Weld on Mount for Bullet Turn Signal Assembly
Application:
This is a full carpet kit.
