Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Bumper End, Right
Bumper End, Right
Bus (Type 2): 68-72
No customer reviews for the moment.
Part #: 111945096N
This assembly comes with the bulb holder and lens.
Application:Part #: NGK D9EA
This Spark plug is only used for Racing or Competition vehicles due to the size of the Spark Plug; Dimensions Below Thread Pitch: 12mm x 1.25mm, Thread Length: 19mm (3/4") Verify that the Thread Pitch and length is compatible with your heads if you have any questions call and ask prior to ordering.
Application:Part #: T1401022
This is a great way to tow your car.
Application:Part #: 111821021P
These new front fenders are not as thick as the original German fenders.
Application:Part #: 221847135A
Seals the side popout windows on buses up to 1967.
Application:Part #: 1105253RD
This is a crank pulley for an upright motor.
Application:Part #: 211867502
This is the vinyl covering for the inside roof and sides of the Bus.
Application:Part #: 111837209
This seal goes between the handle and the body.
Application:Part #: 111801201E
Leftside Rear Cross Member
Application:Part #: 311109335
These tubes go from the case to the heads to house the push rods.
Application:Part #: 62010718E5
End Fill 8x24" Polished Stainless Steel Gas Tank
Application:Part #: 1857520
Albert Swan Neck Mirrors, includes base seal, Pair
Application:Part #: 3251001
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: 1707155
These are the guards on the front and rear bumpers.
Application:Part #: 6411107
Thru Rod 5" and 6" Wider Beam, 46.5" Long, Boxed
Application:Part #: 113905853A
Key part of the ignition switch
Application:
Bumper End, Right
