Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:Y Fitting, Plenum to Booster & Decel
Y Fitting, Plenum to Booster & Decel
Vanagon: 80-83 Manual only
No customer reviews for the moment.
Part #: 1109602
Valve seats are used in the big valve heads.
Application:Part #: 1117101
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 021127307A
This rod drives the fuel pump.
Application:Part #: 1105277
Here are some flywheel pins that give you more contact surface on the flywheel.
Application:Part #: 1827152
These are a must if you live in an area were the temperature reaches 100 degrees or more.
Application:Part #: 211798002
Bumper Bolt Kit
Application:Part #: 6941045
This is the headlight bucket you use in a fiberglass fender of a Baja Bug.
Application:Part #: 1109305
Aluminum Smith Bros. Push Rods
Application:Part #: T1141032
Clutch Alignment Tool
Application:Part #: 113863505
This is the replacement cardboard liner for under the front hood.
Application:Part #: 111955541GY
These are the knobs for the wiper and light switches on the dash.
Application:Part #: 113831449WH
These plastic plugs hide the door hinge screws.
Application:Part #: 133415801
These two rods go from the center tie rod on a Bug, to the spindles, making the car turn.
Application:Part #: 1109310
These lifters are made by Engle and have a small hole in the end of them that allows oil to be pumped onto the cam lobe and lifter face.
Application:Part #: 361821715A
Fender Beading Kit, 4 pieces for 1 car
Application:Part #: 211805039X
Lower Windshield Surround 175mm (7") Tall
Application: