Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Valve seats are used in the big valve heads.
Valve seats are used in the big valve heads. So if you have big valve heads and need to replace the valve seats, this is what you will need. If you are planning on building your own big valve heads, we suggest you price out all the part first, complete heads are usually cheaper.
Bug (Type 1): 1600
Bus (Type 2): 1600
Type 3: 1600
Ghia: 1600
Thing: 1600
Race/Off-Road: 1600
No customer reviews for the moment.
Part #: 1101476BWG
Wolfgang Billet Valve Covers There are a few companys making billet valve covers and I have used a few of them and liked them. But we decided to make our own with a few differences.
Application:Part #: 1101354
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 113101355ACO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 311101353ACO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 111101461
These nuts and washers hold the heads on.
Application:Part #: 1101476
These are great valve covers.
Application:Part #: 1107433
Not our favorite type of piston pin keeps.
Application:Part #: 1101371
40 HP Barrel Shims .010 (4)
Application:Part #: 1107431
There are two types of keepers we like to use.
Application:Part #: 311198169B92
Piston Ring Set 92mm
Application:Part #: 1101468
If you have high compression you will need to vent the valve covers into a breather box.
Application:Part #: 1101372
40 HP Barrel Shims .020 (4)
Application:Part #: 1198087
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 1101389
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1101442
This is a shim that is used between the head and barrel.
Application:Part #: 1101381
Whether your motor lives or not can depend upon this little shim.
Application:
Valve seats are used in the big valve heads.
