Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Shock bolt
The bolt that holds your shock on. Use anti-seeze on these if you ever want to get them off again.
No customer reviews for the moment.
Part #: 113837640AHD
These locks keep the vent wing closed, therefore a must, but they're a pain to replace.
Application:Part #: 1857104
This durable, plastic box replaces the stock cardboard glovebox.
Application:Part #: 113801251
Seat Rails, 1 Set per Seat, 2 sets per car
Application:Part #: 261801804
Inner Post For Side Panel, Full Height
Application:Part #: 113957809
This cable goes from the speedo to the driver side front wheel.
Application:Part #: 111598000A
Spring Plate Hardware Kit
Application:Part #: 1615100STK
Ball-Joint Direct Bolt-on Disc Brake Kit, 4x130 with 14x1.5mm Threads
Application:Part #: 141857509
Mirror Base Seal (set of 2)
Application:Part #: 112920540
40mm Main Venturi for EPC 48/51, 48IDA
Application:Part #: 1845201SASHS
This kit comes with everthing you need to eliminate your vent window, tempered glass, felt window channels, inner and outer snap in scrappers.
Application:Part #: 211721001
Pedal Assembly Bushing Kit
Application:Part #: 1109642
If you are going to run dual springs we suggest you use these valve spring retainers as well.
Application:Part #: 211827905
This bracket holds the license plate to the car.
Application:Part #: 111701475A
This is what your stock jack goes into, to jack up the car.
Application:Part #: N90305201
Intake Manifold Sleeve
Application:Part #: 221883419
Middle Seat Floor Mount Reinforcement Plate, Welds onto floor and supplies support for mount
Application:
Shock bolt
