Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the belt that turns the generator.
This is the belt that turns the generator. We found German belts are the only belts with the correct width. Wider belts tend to ruin the generator pulley. Note: See GENERATOR PULLEY for instructions. Make sure you always carry a spare belt and the tools to change it.
Bus (Type 2): 80-83
No customer reviews for the moment.
Part #: 111903181
Generator Pulley Nut
Application:Part #: JC86010
Jaycee Billet Alternator Pulley, Black
Application:Part #: AL82NCH
This unit supplies the battery with voltage.
Application:Part #: GR15NC
Generators supply the battery with voltage.
Application:Part #: 30091
This little box tells the generator what to do.
Application:Part #: 1903109BOBK
Billet Pulley Outer Half Black
Application:Part #: GR17XCO
Generators supply the battery with voltage.
Application:Part #: 1903532
This is just a cover that fits around a 30amp generator to give it that chrome look.
Application:Part #: 111903131A
Probably the most common cause of generator pulleys coming apart is the shortage of shims.
Application:Part #: 113971901A
This boot goes over the wire and the terminal of the generator or alternator.
Application:Part #: SR11XCO
This is what starts the car.
Application:Part #: SRHT6V
A 6volt gear that fits the high torque starter.
Application:Part #: 1903183
This aftermarket chrome cap nut and spacer hold the alternator/generator pulley on.
Application:Part #: AL8275
This unit supplies the battery with voltage.
Application:Part #: 1903109BORD
Billet Pulley Outer Half Red
Application:
This is the belt that turns the generator.