Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Stainless Steel Carb Windows
Bug (Type 1); All
This is a window kit that you can put into the side of you Bug so you can get to spark plugs, manifold nuts, jets, etc. when running dual carbs. It is a bolt in kit, but you will have to do some cutting on the body. What you get is a mild steel flange that will bolt to the body. You will then cut out the stock sheet metal that is on the inside area of this flange. Then to cover the hole you bolt on the Stainless Steel cover. If you have dual carbs this is a great way to go. Sold in pairs. One pair will do one bug. Inside opening is 6" wide 5" tall. Outside is 7 1/2"long by 6 1/2" tall.
No customer reviews for the moment.
Part #: 111863413
This carpets the area behind the rear seat.
Application:Part #: NGK D7EA
This Spark plug is only used for Racing or Competition vehicles due to the size of the Spark Plug; Dimensions Below Thread Pitch: 12mm x 1.25mm, Thread Length: 19mm (3/4") Verify that the Thread Pitch and length is compatible with your heads if you have any questions call and ask prior to ordering.
Application:Part #: 1198036
If you are converting a single port engine to a dual port or if you have a brand new case; these are the head studs you're looking for.
Application:Part #: 1251166
This is a reproduction of an accesory that was offered by the dealer.
Application:Part #: 039133241
These two boots connect the intake manifold with the end casting,
Application:Part #: 111837595A
This plastic "donut" goes under the window crank or door handle to prevent the door panel from getting ripped.
Application:Part #: 311115329B
This is the rubber sleeve that connects the oil filler to the motor.
Application:Part #: 1198092A
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 113611829A
Master Cylinder to Bulkhead Spacer
Application:Part #: F1612
These are the glues and oils we use..
Application:Part #: 1863620C
This basket fits perfectly on your carpeted console area. This is for those of you who FINALLY wanted a cup holder and/or a goodie basket. I
Application:Part #: 2109001
T4 Camshaft Gear, Bolt On
Application:Part #: 221857305
Chrome Dash Ashtray
Application:Part #: 311201179A
Gas Tank, Overflow Tube
Application:Part #: 143847341
Quarter Window Upright Seal Pair
Application:Part #: 151701061B
Floor Plate, Left, Convertible only
Application:
Stainless Steel Carb Windows
