Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
To check yours remove the front wheels.
To check yours remove the front wheels. Grab the A arm and pull it back and forth. If the arm moves they are bad. Now these bushings are pressed in on the a arms. If you don't have a press it will be difficult to install these. After you install the uppers the front end will need to be aligned.
Vanagon: 80-83
No customer reviews for the moment.
Part #: 1129306050
These are some of the most common jets used.
Application:Part #: 1101399
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 111415381A
Steering Box Drop Arm Bolt
Application:Part #: N122391
Transmission Cradle Bolt Washer
Application:Part #: 211129651B
Oil Breather to Air Cleaner Hose
Application:Part #: 113707391WW
Bumper Support
Application:Part #: WG310012
2 1/16" Oil temp gauge with sending unit. AVAILABLE NOW.
Application:Part #: 1301147
Solid Trans Mid Mount
Application:Part #: 211298371
Lever Set, 2 Blue & 2 Red
Application:Part #: 2311123
This steel thrust plate stops movement of the main shaft bearing and aids in the keepin the alignment of the gears on the main and pinion shafts.
Application:Part #: 1721362
Bolt-on Bowden Bracket, Zinc, Swing Axle + IRS
Application:Part #: 6415812B
Tapered Chromoly Bung, mainly used for fabricating Tie Rods on Offroad/Race Applications. Thread 3/4"-16 RH
Application:Part #: 311953153C
Front turn signal seals.
Application:Type 3; 70-73
Part #: 6707302KIT
Rear HD baja bumper kit. THIS DOES NOT COME WELDED TOGETHER.
Application:
To check yours remove the front wheels.