Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:This is stainless steel braided fuel line.
This is stainless steel braided fuel line. We do not recommend this line unless you are using the screw in fittings everywhere. Don't use clamps because they're too loose and might come off. The hose size is 6AN.
Bug (Type 1): All
Type 3: All
Ghia : All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 311133261A
These o-rings should be replaced whenever you replace a fuel injector, or if they are old and cracked.
Application:Part #: 1127101
Hose Clamp For 7mm Hose
Application:Part #: 1129709
This pair of aluminum end castings are for use with a center section manifold.
Application:Part #: 111127531
8mm Fuel Line Ferrule
Application:Part #: 1129601HD6
This is a replacement air cleaner for the Weber IDF.
Application:Part #: 1129611EL
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:Part #: 1129600
This is a replacement air cleaner for the Weber IDF.
Application:Part #: 311133263
Fuel injection seal large
Application:Part #: 111127541
8mm Fuel Line Union Nut
Application:Part #: 1129610
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 1127110ALM
This is stainless steel braided fuel line.
Application:Part #: N138211
These are the gaskets used between the intake manifold and the cylinder head.
Application:Part #: 1129729BK
These boots are better than stock.
Application:Part #: VCP18
This is a rubber plug that is used to plug off vacuum.
Application:Part #: 1127110
This is a brass tee for dual carbs.
Application: