Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is stainless steel braided fuel line.
This is stainless steel braided fuel line. We do not recommend this line unless you are using the screw in fittings everywhere. Don't use clamps because they're too loose and might come off. The hose size is 6AN.
Bug (Type 1): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 1129608EL
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 1129709
This pair of aluminum end castings are for use with a center section manifold.
Application:Part #: 111127141
Fuel Pump Diaphragm 25-36 HP
Application:Part #: 111127531A
6mm Fuel Line Ferrule
Application:Part #: 1129611
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:Part #: 1127102ALF
This is stainless steel braided fuel line.
Application:Part #: VCP12
This is a rubber plug that is used to plug off vacuum.
Application:Part #: 111127541A
6mm Fuel Line Union Nut
Application:Part #: N138211
These are the gaskets used between the intake manifold and the cylinder head.
Application:Part #: 113129701K
Single Port, Intake Manifold, 1500-1600cc, 30mm Base
Application:Part #: 113129709D
Dual Port Manifold End Casting - Left
Application:Part #: 1127027
This regulator adjusts the fuel pressure to you carburator.
Application:Part #: 1127108ALF
This is stainless steel braided fuel line.
Application:Part #: 1127109ALM
This is stainless steel braided fuel line.
Application:Part #: N138231
These are the gaskets used between the intake manifold and the cylinder head.
Application:Part #: 1129610EL
This air cleaner takes the place of a stock air cleaner.
Application:
This is stainless steel braided fuel line.