Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The fuel pump sits on this little stand and it's also the guide for the push rod. If you are going to use an old flange, make sure it's not cracked and that the end has not broken off. Note: Make sure it goes into the case easily. If it doesn't, sand the stem so that it slides into place. Do not over tighten it or you will crack it.
Bus (Type 2): 1700-1800
No customer reviews for the moment.
Part #: 1129601HD6
This is a replacement air cleaner for the Weber IDF.
Application:Part #: VCP12
This is a rubber plug that is used to plug off vacuum.
Application:Part #: 1129604
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 2129702
We have found this kit to be a good, cheap dual carb kit for a stock motor.
Application:Part #: 0280160200
Fuel Pressure Regulator for later air cooled Bugs and Buses
Application:Part #: 1129601EL6
This is a replacement air cleaner for the Weber IDF.
Application:Part #: 113127313
These stock pumps pump fuel into the carburetor.
Application:Part #: 111127531
8mm Fuel Line Ferrule
Application:Part #: 111127511A
This metal line goes from the pump around the fan shroud to the flex line that comes from the gas tank.
Application:Part #: 1129025
This is a new aftermarket UNIVERSAL intake manifold for Dual Port Engines. You can use a 30 Pict1 or 34Pict3 Carburetor. We have had major icing problems with this part and prefer stock manifolds.
Application:Part #: 111127141
Fuel Pump Diaphragm 25-36 HP
Application:Part #: 113127521A
This metal line goes from the pump around the fan shroud to the flex line that comes from the gas tank.
Application:Part #: 1129606EL
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 1127112
This regulator adjusts the fuel pressure to you carburator.
Application:Part #: 113127025G
These stock pumps pump fuel into the carburetor.
Application: