Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This plug is used for plugging the outlet passage on an oil pump when full flowing oil pump. 1/4 NPT
You will need to plug the outlet side of the oil pump, which will force the oil out the cover. From this cover, the oil is routed to a filter then to a cooler and back into the case. The case must be full flowed, in other words, machined for the return line. This is the optimal way to run an external cooler, while maintaining the stock cooler. We recommend using a full flow cover with a System One oil filter and the Mesa 72 plate oil cooler. You should also use the stock 1971 on doghouse internal oil cooler. All covers are for 8mm studded oil pumps.
Bug (Type 1): All
Bus (Type 2): -71
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: N110062
Some of the more common nuts you might need..
Application:Part #: 1115610RD
Billet Dipstick, Red
Application:Part #: 111115111B
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1117103
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 311115107AK
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: JC22660
Jaycee Street Oil Filter Bracket, Black
Application:Part #: 111115131A
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1117107
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1117698
When mounting the oil cooler above the transmission on a Bug, Type 3, Ghia, Thing, or Off Road car you can use these rubber mounted studs.
Application:Part #: 1117100
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1117007
This is the high-temp/pressure hose used for routing oil to coolers and filters.
Application:Part #: 1115610
Chrome dipsticks come in different lengths and styles..
Application:Part #: 111115451
This rubber collar goes around the dump tube that comes from the generator stand.
Application:Part #: 1117102
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1117023FAN
This is the same as the mesa cooler but with a fan mounted to it.
Application:Part #: 111115450
Vapor Baffle 25-36 HP
Application:
This plug is used for plugging the outlet passage on an oil pump when full flowing oil pump. 1/4 NPT
