Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
A great way to increase the oil capacity of your engine is to bolt on a deep sump.
A great way to increase the oil capacity of your engine is to bolt on a deep sump. This sump add 1.5 quarts of oil to your system to eliminate oil starvation and increase cooling. An oil sump eliminates oil starvation and increases cooling by keeping the oil cycle time down. Cast from aluminum for maximum heat dissipation. We highly recommend this item. It is much cheaper than a new engine.
No customer reviews for the moment.
Part #: 1115610BL
Billet Dipstick, Blue
Application:Part #: 1117007
This is the high-temp/pressure hose used for routing oil to coolers and filters.
Application:Part #: 1117012
These bolt on mounts allow you to bolt the filter adapter under the driver's side fender or hang it off the exhaust flange..
Application:Part #: 1117023FAN
This is the same as the mesa cooler but with a fan mounted to it.
Application:Part #: 113115475
It's possible to put a generator on an alternator stand but not the other way around.
Application:Part #: 1115457RD
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Red
Application:Part #: 1117102
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: JC22660
Jaycee Street Oil Filter Bracket, Black
Application:Part #: JC22970
Jaycee Billet Full Flow Pump Cover w/ -8 O-ring Fitting, Red
Application:Part #: 311115541
This boot goes on the end of the dump tube.
Application:Part #: JC21010
Jaycee Mag-Plate, 6 Bolt, Red
Application:Part #: 1115485CH
A stock cap that has been chromed for looks..
Application:Part #: N110623
Some of the more common nuts you might need..
Application:Part #: 1115453
This stock oil filler and cap has been chromed.
Application:Part #: 1117111
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: JC22230
Jaycee Billet Oil Cap with Breater -8 AN Fitting, Blue
Application:
A great way to increase the oil capacity of your engine is to bolt on a deep sump.
