Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This plate is made out of a solid piece of aluminum. Blue
This plate is made out of a solid piece of aluminum. It's a lot thicker than the stock sump plate. It looks cool too. Blue
Bug (Type 1): 62-79
Bus (Type 2): 61-71
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 1115453
This stock oil filler and cap has been chromed.
Application:Part #: 1117104
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1115465
This air filter is made to protect the crankcase.
Application:Part #: 1115610
Chrome dipsticks come in different lengths and styles..
Application:Part #: 1115183BK
This plate is made out of a solid piece of aluminum. Black
Application:Part #: 1115109
This oil thermostat goes in line on your external oil cooler system.
Application:Part #: N110062
Some of the more common nuts you might need..
Application:Part #: 113117303
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 6115349
If you built your motor out of a type 3 case, you probably notice that once you got it all together you're missing a dipstick tube.
Application:Part #: 1117106ALM
These fittings are used for the stainless steel hose.
Application:Part #: 1115450PL
The oil filler extension screws into the generator stand and comes with a fitting to vent the crankcase.
Application:Part #: 113115181A
This is the plate on the bottom of the motor.
Application:Part #: 1115181
A stock sump plate that has been chromed..
Application:Part #: 1117099
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1115464
This air filter is made to protect the crankcase.
Application:Part #: JC22950
Jaycee Billet Full Flow Pump Cover w/ -8 O-ring Fitting, Black
Application:
This plate is made out of a solid piece of aluminum. Blue
