Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The oil filler extension screws into the generator stand and comes with a fitting to vent the crankcase.
The oil filler extension screws into the generator stand and comes with a fitting to vent the crankcase. You can get extensions without a vent, but we don't carry them, because you need to vent the crankcase. This style comes with a screw on cap.
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
Race/Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: 113115193
This is the bolt that goes in the plate on the bottom of the motor.
Application:Part #: 1115106
A great way to increase the oil capacity of your engine is to bolt on a deep sump.
Application:Part #: 1117699
When mounting the oil cooler above the transmission on a Bug, Type 3, Ghia, Thing, or Off Road car you can use these rubber mounted studs.
Application:Part #: 1115611
Chrome dipsticks come in different lengths and styles..
Application:Part #: 111115107AHD
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1115351BUL
This is the last oil filter you will ever buy.
Application:Part #: 113115611
No, this isn't that distant cousin.
Application:Part #: 1115349
This plate will block off the type 3 oil filler hole in a universal case.
Application:Part #: 311115541
This boot goes on the end of the dump tube.
Application:Part #: 1115467HO
This is a breather box that will give excess "blow by" a place to go.
Application:Part #: 1115142HD
This oil pump cover comes with a threaded boss.
Application:Part #: 113198031
These gaskets are used on the sump plates of the engine.
Application:Part #: 111115107B
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 111115107AKS
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1115107FF
30mm Oil pump for Dual Relief & Flat cam Full Flowed Engines
Application:Part #: JC21030
Jaycee Mag-Plate, 6 Bolt, Blue
Application:
The oil filler extension screws into the generator stand and comes with a fitting to vent the crankcase.
