Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the last oil filter you will ever buy.
This is the last oil filter you will ever buy. The System One filter can be used on any motor or adapter that takes a spin on filter. It uses a stainless steel screen to filter the oil down to 60 microns. The high flow inlet will not restrict lubricant flow or contribute to a reduction of pressure. The die-cast aluminum housing is not only strong but also good looking. It's easy to clean, use soap or solvent. Tattle tale inspection, quick removal and easy to read filtration screen gives you an early warning of internal problems. High flow bypass maintains maximum efficiency to 5 microns before activation. One of the best purchases you will ever make.
No customer reviews for the moment.
Part #: 1117011
These bolt on mounts allow you to bolt the filter adapter under the driver's side fender or hang it off the exhaust flange..
Application:Part #: 311115107AHD
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 111117151
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 1115456
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily.
Application:Part #: 1117113
This adapter replaces the stock oil cooler with two hoses to reroute the oil to an external oil cooler.
Application:Part #: 1117012
These bolt on mounts allow you to bolt the filter adapter under the driver's side fender or hang it off the exhaust flange..
Application:Part #: 113117321
Hoover Bit, Oil Cooler Sealing Frame
Application:Part #: 311115541
This boot goes on the end of the dump tube.
Application:Part #: 1117098
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1115193
This plug for the bottom of the sump plate has a magnet in it.
Application:Part #: 043115531A
Oil Filler with Cap
Application:Part #: 111115450
Vapor Baffle 25-36 HP
Application:Part #: 1117103ALM
These fittings are used for the stainless steel hose.
Application:Part #: 1115610BL
Billet Dipstick, Blue
Application:Part #: 1115140
This plug is used for plugging the outlet passage on an oil pump when full flowing oil pump. 1/4 NPT
Application:Part #: 113115451D
Oil Filler with Tube
Application:
This is the last oil filter you will ever buy.