Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This adapter is used to mount an oil filter either by itself or in line with an oil cooler.
This adapter is used to mount an oil filter either by itself or in line with an oil cooler. On bugs we usually mount them in the driver's side fender well, just under the tail light wires. See 1117011 for a slick mount for bugs.
Race/Off-Road: All
No customer reviews for the moment.
Part #: 1115431
This hex drive replacement plug is for the case relief spring(s).
Application:Part #: 1117109B
Billett Oil Cooler Block Off
Application:Part #: 1115449RD
Replacement Oil Cap Billet Red
Application:Part #: 1117109
This block off plate is made to loop the oil back into the case in place of the stock oil cooler.
Application:Part #: 1117099
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 113117021
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 6115467E
These are a nice unit and much better for off road cars than the cast aluminum breather box.
Application:Part #: 1117102
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1119031
Replacement fan
Application:Part #: 1117113
This adapter replaces the stock oil cooler with two hoses to reroute the oil to an external oil cooler.
Application:Part #: 1117103ALM
These fittings are used for the stainless steel hose.
Application:Part #: 1117106ALM
These fittings are used for the stainless steel hose.
Application:Part #: 1115610BL
Billet Dipstick, Blue
Application:Part #: 2117004
This adapter is used to mount an oil filter either by itself or in line with an oil cooler.
Application:Part #: 6115467ESH
These are a nice unit and much better for off road cars than the cast aluminum breather box.
Application:Part #: 1117111
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:
This adapter is used to mount an oil filter either by itself or in line with an oil cooler.
