Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Chrome dipsticks come in different lengths and styles..
Chrome dipsticks come in different lengths and styles.
Bug (Type 1): 36hp-1600
Bus (Type 2): 36hp-1600
Ghia: 36hp-1600
Thing: 36hp-1600
Race/Off-Road: 36hp-1600
No customer reviews for the moment.
Part #: 111115487
It caps the hole you are aiming at while pouring oil over everything else.
Application:Part #: 1117005
This adapter is used to mount an oil filter either by itself or in line with an oil cooler.
Application:Part #: 1115106A
This is a great way to increase the oil capacity of your engine.
Application:Part #: 111115485
It caps the hole you are aiming at while pouring oil over everything else.
Application:Part #: JC22960
Jaycee Billet Full Flow Pump Cover w/ -8 O-ring Fitting, Blue
Application:Part #: 1117023
Mesa coolers are the state of the art oil coolers.
Application:Part #: 1115450PL
The oil filler extension screws into the generator stand and comes with a fitting to vent the crankcase.
Application:Part #: 111117151
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 1117102
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1115105E
Oil Pick Up Tube Cut To Length
Application:Part #: N110062
Some of the more common nuts you might need..
Application:Part #: 1117698
When mounting the oil cooler above the transmission on a Bug, Type 3, Ghia, Thing, or Off Road car you can use these rubber mounted studs.
Application:Part #: 111115107AK
VW flat cam, 21mm, 8mm Stud Oil Pump
Application:Part #: N110085
Some of the more common nuts you might need..
Application:Part #: 1117011
These bolt on mounts allow you to bolt the filter adapter under the driver's side fender or hang it off the exhaust flange..
Application:Part #: 1115120
Melling Oil Pump for 8mm Studs with Flat Cam Gear
Application:
Chrome dipsticks come in different lengths and styles..
