Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These shims are used under the rockers to set the geometry.
These shims are used under the rockers to set the geometry. This is a very important step, so if you need help, call and we will be happy to explain it to you. Sold in sets of four.
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Type 3: 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
Race/Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: 1109410
These shims are used with the Solid Shaft Rocker Kit.
Application:Part #: JC91040
Jaycee Leak proof Pushrod Tubes, Silver
Application:Part #: 1109605
Stainless steel valves are used in the big valve heads.
Application:Part #: 11094011
Rocker Arms Kit, HP Stock 1.1
Application:Part #: 11310140108
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: 1109401125
Rocker Arms, High Ratio 1.25, w/Bushing, Set
Application:Part #: 113109335
These tubes go from the case to the heads to house the push rods.
Application:Part #: 1109006
These gears give just a hair more horsepower.
Application:Part #: 111198541GR
The cam rides in these bearings.
Application:Part #: N111521
This screw rides against your valve, opening and closing it.
Application:Part #: 111109611A
Exhaust Valve 36 HP
Application:Part #: 1109400
This kit eliminates the clips and spring washers in a rocker shaft set up.
Application:Part #: 1109337
These push rod tubes are spring loaded and are great for replacing bent tubes without having to pull the head(s) off.
Application:Part #: 113109651A
These springs return the valves back to their seats.
Application:Part #: 043109611A
The two outside valves in the head are the exhaust valves, they let the burned fuel out of the head.
Application:Part #: 311109601
The two inside valves in the head are the intake valves, which let the gas into the combustion chamber.
Application:
These shims are used under the rockers to set the geometry.
