Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This spring returns the clutch arm.
This spring returns the clutch arm. If yours is broken the throw-out bearing will wear out faster. Note: To install this spring first take the clutch cable out of the arm and remove the clip that holds the arm to the shaft. Remove the arm and broken spring. Install the new spring leaving it off the arm. Once the arm is back on with the clip, use a large Phillips screwdriver to pry the hook end of the spring back onto the arm.
No customer reviews for the moment.
Part #: 1141031
These clutch disc do not slip.
Application:Part #: 1141701A
This heavy duty arm is a good idea if you need a new clutch arm.
Application:Part #: 111141031F
This disc transfers the power from the motor to the transmission.
Application:Part #: 1198026A
This kit contains a quality urethane bushing, a clutch return spring and retaining clips needed to install the throw-out bearing arm in the transmission.
Application:Part #: 1141027
Kennedy Stage 3 Pressure plate 2600 LB
Application:Part #: 111141719HD
Clutch Cable Arm Forged for 20mm Cross shaft
Application:Part #: 1141030
200mm 6 puck Clutch Disc
Application:Part #: 1141701B
This heavy duty arm is a good idea if you need a new clutch arm.
Application:Part #: 113198026
This kit contains a bushing, a clutch return spring and the retaining clips to install the throw-out bearing shaft in the transmission.
Application:Part #: 111141165A
Also known as a throw-out bearing, this bearing's function is to disengage the clutch.
Application:Part #: 1141026
We only offer brand new pressure plates because so-called rebuilt pressure plates never quite come up to factory pressure specs.
Application:Part #: 113141723
This spring returns the clutch arm.
Application:Part #: 311141025C
The clutch cover is also known as a pressure plate.
Application:Part #: 311141031B
This disc transfers the power from the motor to the transmission.
Application:Part #: 1141025
Heavy Duty Clutch Pressure Plate - 1700lbs. This is made by KEP
Application:Part #: 111721305C
This is the shaft that the clutch pedal attaches to.
Application:
This spring returns the clutch arm.
