Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This heavy duty arm is a good idea if you need a new clutch arm.
This heavy duty arm is a good idea if you need a new clutch arm. See URETHANE CLUTCH ARM BUSHING KIT for installation. Note: Before installing, try the splined arm to make sure it fits well. If it doesn't, you'll need to do a little spline cleaning with a file.
Bug (Type 1): 61-70
Bus (Type 2): 61-67
Type 3: 64-70
Ghia: 61-70
Race/Off-Road: 61-70
No customer reviews for the moment.
Part #: 1141027
Kennedy Stage 3 Pressure plate 2600 LB
Application:Part #: 1141025CH
HD Pressure Plate 1700 lbs China
Application:Part #: 1141026
We only offer brand new pressure plates because so-called rebuilt pressure plates never quite come up to factory pressure specs.
Application:Part #: 1141025
Heavy Duty Clutch Pressure Plate - 1700lbs. This is made by KEP
Application:Part #: 311141025E
The clutch cover is also known as a pressure plate.
Application:Part #: 131141719HDL
Clutch Cable Arm Forged for 16mm Cross shaft
Application:Part #: 1141701B
This heavy duty arm is a good idea if you need a new clutch arm.
Application:Part #: 131141719HD
Clutch Cable Arm Forged for 16mm Cross shaft
Application:Part #: 113141701E
This shaft holds the throw-out bearing in place.
Application:Part #: 111141031E
This disc transfers the power from the motor to the transmission.
Application:Part #: 113141701C
This shaft holds the throw-out bearing in place.
Application:Part #: 211141025D
The clutch cover is also known as a pressure plate.
Application:Part #: 111141723A
Return Spring For Cross Shaft
Application:Part #: 111141177AS
These clips hold the throw-out bearing to the arm.
Application:Part #: N122412
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 113141701F
This shaft holds the throw-out bearing in place.
Application:
This heavy duty arm is a good idea if you need a new clutch arm.
