Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Also known as a throw-out bearing, this bearing's function is to disengage the clutch.
Also known as a throw-out bearing, this bearing's function is to disengage the clutch. When checking an old bearing, just spin it to see if it sounds dry. We suggest you use a German Sachs bearing as we have seen problems with other brands.
No customer reviews for the moment.
Part #: 311141031D
This disc transfers the power from the motor to the transmission.
Application:Part #: 311141025E
The clutch cover is also known as a pressure plate.
Application:Part #: 111721305C
This is the shaft that the clutch pedal attaches to.
Application:Part #: 1141025
Heavy Duty Clutch Pressure Plate - 1700lbs. This is made by KEP
Application:Part #: 361141719HD
Clutch Cable Arm Forged for 20mm Cross shaft
Application:Part #: 113141723
This spring returns the clutch arm.
Application:Part #: N122412
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 113721305B
This is the shaft that the clutch pedal attaches to.
Application:Part #: 1141033
Cushion Clutch Disc - 200mm
Application:Part #: 1141031
These clutch disc do not slip.
Application:Part #: 1141701A
This heavy duty arm is a good idea if you need a new clutch arm.
Application:Part #: 211141025D
The clutch cover is also known as a pressure plate.
Application:Part #: 111141177AS
These clips hold the throw-out bearing to the arm.
Application:Part #: 113141701C
This shaft holds the throw-out bearing in place.
Application:Part #: 211141025A
Clutch Cover, 12 volt 200mm, 9 spring
Application:Part #: 311141025C
The clutch cover is also known as a pressure plate.
Application:
Also known as a throw-out bearing, this bearing's function is to disengage the clutch.
