Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This heavy duty arm is a good idea if you need a new clutch arm. See URETHANE CLUTCH ARM BUSHING KIT for installation. Note: Before installing, try the splined arm to make sure it fits well. If it doesn't, you'll need to do a little spline cleaning with a file.
Bus (Type 2): 76-79
Race/Off-Road: All
No customer reviews for the moment.
Part #: 1141025CH
HD Pressure Plate 1700 lbs China
Application:Part #: 111141177AS
These clips hold the throw-out bearing to the arm.
Application:Part #: 1141033
Cushion Clutch Disc - 200mm
Application:Part #: 111141165A
Also known as a throw-out bearing, this bearing's function is to disengage the clutch.
Application:Part #: 1198026A
This kit contains a quality urethane bushing, a clutch return spring and retaining clips needed to install the throw-out bearing arm in the transmission.
Application:Part #: 113198026
This kit contains a bushing, a clutch return spring and the retaining clips to install the throw-out bearing shaft in the transmission.
Application:Part #: 211141031L
This disc transfers the power from the motor to the transmission.
Application:Part #: 091141701
This shaft holds the throw-out bearing in place.
Application:Part #: 251721401A
This master cylinder pushes fluid to the slave cylinder on the clutch..
Application:Part #: N122412
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: N102401
This is a list of the most common bolts used on a car..
Application:Part #: 113141723C
This spring returns the clutch arm.
Application:Part #: 311141031B
This disc transfers the power from the motor to the transmission.
Application:Part #: 002141701
This shaft holds the throw-out bearing in place.
Application:Part #: 111141031F
This disc transfers the power from the motor to the transmission.
Application:Part #: 211141025D
The clutch cover is also known as a pressure plate.
Application: