Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This slave cylinder moves the clutch arm, releasing the clutch. If you are having problems with the clutch disengaging, find the cylinder (drivers' side of the transmission towards the top) and see if it is leaking. If it is replace it. If not then make sure your master cylinder resevoir is full (behind the speedo meter) and try bleeding the slave cylinder.
Bus (Type 2): 80-92
No customer reviews for the moment.
Part #: 211141025D
The clutch cover is also known as a pressure plate.
Application:Part #: 111141177AS
These clips hold the throw-out bearing to the arm.
Application:Part #: 113141181B
Guide Sleeve
Application:Part #: 068141025D
The clutch cover is also known as a pressure plate.
Application:Part #: 2141701A
This heavy duty arm is a good idea if you need a new clutch arm.
Application:Part #: 1141027
Kennedy Stage 3 Pressure plate 2600 LB
Application:Part #: N122412
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 111141723A
Return Spring For Cross Shaft
Application:Part #: 113141701C
This shaft holds the throw-out bearing in place.
Application:Part #: 1198026A
This kit contains a quality urethane bushing, a clutch return spring and retaining clips needed to install the throw-out bearing arm in the transmission.
Application:Part #: 111141031F
This disc transfers the power from the motor to the transmission.
Application:Part #: 091141701
This shaft holds the throw-out bearing in place.
Application:Part #: 002141701
This shaft holds the throw-out bearing in place.
Application:Part #: 1141701A
This heavy duty arm is a good idea if you need a new clutch arm.
Application:Part #: 211141025A
Clutch Cover, 12 volt 200mm, 9 spring
Application:Part #: 361141719HD
Clutch Cable Arm Forged for 20mm Cross shaft
Application:
