Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N141212
These are the latches that hold the popout frame out.
Application:This plate goes between the two nuts on each of the front spindles.
This plate goes between the two nuts on each of the front spindles. It is bent to lock the nuts keeping them from spinning. Install the first nut, the plate, and then the outer nut. Tighten the outer nut against the plate making sure you don't spin the inner nut. Use a large pair of channel locks to bend one tab against the inner nut and the remaining tab against the outer nut. Note: This plate should be replaced every time you pull the drum off.
No customer reviews for the moment.
Part #: 6401300A
If your stock bushings are worn out or you have an aluminum beam, we offer the following urethane bushings and replacements..
Application:Part #: 2847521A
This seal goes on the body of the bus, that the safari window closes against.
Application:Part #: 111819189B
Heater Vent, Plastic, LH
Application:Part #: 1601117
These protect your mags from theft.
Application:Part #: 1105305
This washer is larger in diameter than stock so it gives you more surface coverage over the dowel pins.
Application:Part #: 211201119
This is part of the filler neck..
Application:Part #: 111903137D
This is the belt that turns the generator.
Application:Part #: 043119350B
Heater Channel Tin Upper Right
Application:Part #: 211721163C
Brake Pedal Return Spring
Application:Part #: 141561410AKT
Beautiful Classic Wood with Polished chrome Spokes.
Application:Part #: 1129199175
Needle Valve for 40/44 HPMX (EMPI), 40-48 IDF (Weber) 1.75mm
Application:Part #: T1401025
This is a great way to tow your car.
Application:Part #: 1615125B
Right Rear Caliper, 4x130, with Emergency Brake, Swing Axle
Application:Part #: 2301150
This is a bolt on kit that reduces torsional stress felt at the front of the nose cone mount and rotational stress on the bell housing mounts.
Application:Bus (Type 2); 56-67
Part #: 1601156
Castle-Design Hubcap, fits 5 Lug Wheels up to 1965
Application: