Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This pipe comes out of the bottom of your gas tank.
This pipe comes out of the bottom of your gas tank. If you look at it, you'll see it actually sticks up into the tank. It's designed this way to prevent gas from being drawn off the bottom of the tank and to keep rust or rocks from plugging the pipe. Note: While you have the tap off, check the screen. If you don't have a screen, it's a good idea to buy one.
Bug (Type 1): 62-79
Bus (Type 2): 62-79
Type 3: 64-74
Ghia (Type 4): 62-74
Thing (Type 5): All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 113919051F
The sending unit registers the fuel level on the gauge.
Application:Part #: 803201511E
This filter goes in line with the fuel line, keeping dirt or rust out of the carburetor.
Application:Part #: 111209113A
Fuel Tap Rebuild Kit
Application:Part #: 113919133
The sending unit registers the fuel level on the gauge.
Application:Part #: 211201105
Fuel Sender Blockoff Plate
Application:Part #: 343201551C
Locking Gas Cap
Application:Part #: 111209147A
This tube like screen is located in the bottom of the gas tank.
Application:Part #: 211201557A
Cork Gas Cap Gasket, fits 60mm fuel caps
Application:Part #: 321201551H
The most common reason, for replacing a cap is forgetting to put it back on at the gas station.
Application:Part #: 111209189A
This grommet goes around the fuel line to protect it from getting cut (due to vibrations) where it comes out of the tunnel through the pan.
Application:Part #: 113919131A
The sending unit registers the fuel level on the gauge. This is the seal that goes around that sending unit
Application:Part #: 113201075ABX
These are new Brazilian tanks.
Application:Part #: 133201075G
These are new Brazilian tanks.
Application:Part #: 133201179
Fuel Elbow, "T" to Filler Neck
Application:Part #: 111809931
Fuel Filler Door Spring
Application:Part #: 113201215
This is a small rubber sleeve that goes on the neck of the gas tank before you slide the fuel filler hose on..
Application:
This pipe comes out of the bottom of your gas tank.