Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is what starts the car.
This is what starts the car. It usually quits the furthest place from home. To bench test a starter is tough, as they can work but are weak. In other words, it will work on the bench, but as soon as it has the drag of the engine on it, it won't. The way we test starters is in the car with a remote starter button (a push button with two long wires). Disconnect the battery. Hook up one of the wires to the big post that the battery cable is hooked to and the other wire to where the push-on wire is located. Now connect the battery back up and make sure the E-brake is on and the car is out of gear. Push the remote starter button. If the engine turns over the starter is good, and if it doesn't, it's bad. If you find the starter works with the remote starter but not with the key, call us. You might need a hard start relay or a new electrical part in the ignition switch. Some starters are sold on exchange.
Bug (Type 1): -66
Bus (Type 2): -66
Type 3: -66
Ghia: -66
Race/Off-Road: -66
No customer reviews for the moment.
Part #: SR11X
This is what starts the car.
Application:Part #: 113971901A
This boot goes over the wire and the terminal of the generator or alternator.
Application:Part #: 30049
This little box tells the alternator what to do. This is a german one but is not Bosch
Application:Part #: GR11X
Generators supply the battery with voltage.
Application:Part #: 1903141B
This strap is much stronger than the stock strap, not that you need a super strap to hold the alternator or generator.
Application:Part #: 1903109CH
This is a stock generator pulley that has been chromed.
Application:Part #: 1301103
This bushing is made to mate mismatched bellhousing and starter combinations.
Application:Part #: 1903109RD
Billet Alt/Gen Pulley Red
Application:Part #: JC86020
Jaycee Billet Alternator Pulley, Red
Application:Part #: 111119141A
Cooling Fan Nut
Application:Part #: 1903183
This aftermarket chrome cap nut and spacer hold the alternator/generator pulley on.
Application:Part #: 043903109GR
This is the pulley on the generator that holds the belt.
Application:Part #: AL82NC
This unit supplies the battery with voltage.
Application:Part #: 111119131
Fan Hub Washer
Application:Part #: N127051
This is the pulley on the generator that holds the belt.
Application:Part #: GR15X
Generators supply the battery with voltage. Rebuilt + Core
Application:
This is what starts the car.