Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the clip for the tube that goes through the fan shroud that the accelerator cable threads through.
This is the clip for the tube that goes through the fan shroud that the accelerator cable threads through. We usually put a 10mm flat washer on it, then stick it through the shroud. On the backside of the shroud, use a fuel line hose clamp on the tube to keep it from pulling back through the shroud.
Bug (Type 1): 28PIC
Bus (Type 2): 28PIC
Ghia: 28PIC
No customer reviews for the moment.
Part #: 211129893
This is the tube that goes through the fan shroud that the accelerator cable threads through.
Application:Part #: 113129905
This is the tube that goes through the fan shroud that the accelerator cable threads through.
Application:Part #: 113129901
This is the tube that goes through the fan shroud that the accelerator cable threads through.
Application:Part #: 1601058CAP
Replacement Center Cap for Rebel and Cosmo Rims including metal Retaining Clip
Application:Part #: 113957801A
This cable goes from the speedo to the driver side front wheel.
Application:Part #: 211721555D
This cable operates the carburetor(s).
Application:Part #: 221883861A
When you mount the middle seat, you'll want the rubber mat down and the bolts in the key slots first.
Application:Part #: 4881404CU
Like the custom door panels these car seat covers are a great way to customize the interior of your Bug.
Application:Part #: 113857553
Mount Rod for Right Visor
Application:Part #: 211703021
Sections that are used for repairing the frame.
Application:Part #: 1105720
Chevy Rod Bearings STD
Application:Part #: 1863703R
Front floor mats provide carpet protection..
Application:Part #: 253070702
Replacement canvas for your camper.
Application:Part #: 211501249
This large soft plug is on the back side of reduction boxes with the 46mm axle nut.
Application:Part #: 311945223P
These are the rear lenses for the tail light, brake light and turn signal light.
Application:Part #: 6201550B
Spun aluminum gas tanks for Buggies, come with either end fill or center fill option.
Application:Part #: 1127113F
3/8" Hard Line to No. 6 Female
Application:Part #: 111105245
This seal goes behind the flywheel.
Application:Part #: 111863708
This is a full carpet kit.
Application:
This is the clip for the tube that goes through the fan shroud that the accelerator cable threads through.