Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:This flex hose goes from the metal brake line to the front wheel cylinder.
This flex hose goes from the metal brake line to the front wheel cylinder. Get your buddy to help you check the brake hose. Jack up the front of the car and get down and spin the wheel. Now have your friend step on the brakes, the wheel should stop. Have your friend let off the pedal and try to spin the wheel again. If the wheel spins freely right away, the hose is fine. If it's tight, crack the bleeder valve open for a second. If the wheel spins free after that, then you have a bad hose. Old hoses tend to collapse inward. Brake fluid is allowed to flow to the wheel cylinder because of the pressure. However, the return spring doesn't have as much pressure and the brake fluid can't return. m/f 430mm
No customer reviews for the moment.
Part #: 113881479B
These are the cover plates that go on the bottom of the seat frame..
Application:Part #: 113945191
This seal goes between the tail light housing and the body of the car..
Application:Part #: T1129028
Some carb combo's are tricky to sync, like kadrons that have a stud sticking up.
Application:Part #: 6941046A
These are the headlight shells you would use on a Manx style or tube car..
Application:Part #: 113857131
Glove Box Latch
Application:Part #: 211809586
Rocker Panel, Lower Right
Application:Part #: 1707135BBK
This is one of the original bumper options that was used on the first Cal-Look Bugs back in the 70's.
Application:Part #: 111411027
Torsion Bar Set, 2 Required
Application:Part #: 111411155
Nut for Grub Screw for Torsion Bar
Application:Part #: 211845521A
This seal is for the rear window.
Application:Part #: 111405615
Front Brake Drum
Application:Part #: T1721349
This is a tool that grabs the ears of your clutch wing nut, making it easier to adjust.
Application:Part #: 221809101F
Complete Left Side Panel NO SHIPPING!!!
Application:Part #: 211955233
Sleeve for One Eyed Duck
Application:Part #: 151871041C
This boot keeps the wind from ripping up your top when it is down.
Application:Part #: 241863021
This is a full carpet kit.
Application: