Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is what starts the car.
This is what starts the car. It usually quits the furthest place from home. To bench test a starter is tough, as they can work but are weak. In other words, it will work on the bench, but as soon as it has the drag of the engine on it, it won't. The way we test starters is in the car with a remote starter button (a push button with two long wires). Disconnect the battery. Hook up one of the wires to the big post that the battery cable is hooked to and the other wire to where the push-on wire is located. Now connect the battery back up and make sure the E-brake is on and the car is out of gear. Push the remote starter button. If the engine turns over the starter is good, and if it doesn't, it's bad. If you find the starter works with the remote starter but not with the key, call us. You might need a hard start relay or a new electrical part in the ignition switch. Some starters are sold on exchange.
Bug (Type 1): 67-
Bus (Type 2): 67-75
Type 3: 67-
Ghia: 67-
Thing: 73-74
Race/Off-Road: 67-
No customer reviews for the moment.
Part #: 111199101
These are the bolts that hold the engine in.
Application:Part #: 1903141B
This strap is much stronger than the stock strap, not that you need a super strap to hold the alternator or generator.
Application:Part #: SR11XCO
This is what starts the car.
Application:Part #: 1903183
This aftermarket chrome cap nut and spacer hold the alternator/generator pulley on.
Application:Part #: 042903109AGR
VW Generator Pulley, 6V
Application:Part #: 1903531
On all upright motor, this plastic cover goes over the top opening of the generator to keep dirt out.
Application:Part #: 1903532
This is just a cover that fits around a 30amp generator to give it that chrome look.
Application:Part #: 113119031A
This is the fan that fits inside of the fan shroud on Bugs 1971-1979 and a 1971 Bus.
Application:Part #: AL82NC
This unit supplies the battery with voltage.
Application:Part #: AL8275
This unit supplies the battery with voltage.
Application:Part #: 113903141A
The generator strap goes around the generator and holds the generator to the stand..
Application:Part #: 042903109ABR
This is the pulley on the generator that holds the belt.
Application:Part #: 30019
This little box tells the generator what to do.
Application:Part #: SR17XCO
This is what starts the car.
Application:Part #: 111119141A
Cooling Fan Nut
Application:Part #: JC86000
Jaycee Billet Alternator Pulley, Blue
Application:Part #: 1301103
This bushing is made to mate mismatched bellhousing and starter combinations.
Application:
This is what starts the car.
