Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is a stock pulley that has been chromed.
This is a stock pulley that has been chromed. We prefer the degree pulleys.
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
Race/Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: 1105169
These cranks are made from stock German core cranks.
Application:Part #: 111105313A
It's really a bolt, but that's what everybody calls it.
Application:Part #: 113105245FS
This seal goes behind the flywheel.
Application:Part #: 1105401A
These connecting rods are longer than stock.
Application:Part #: 113105401ACO
Most people don't realize that these are one of the most important parts in the motor.
Application:Part #: 311105273ARC
These flywheels have been reconditioned and are sold on an exchange basis.
Application:Part #: 111105259
The bolt and washer that holds the crankshaft pulley on.
Application:Part #: 1105278
Here are some flywheel pins that give you more contact surface on the flywheel.
Application:Part #: 1105259
This is a chrome stock bolt and washer that holds the crankshaft pulley on.
Application:Part #: 111105213
This key goes into the crank to align the steel cam gear with the brass distributor drive gear.
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 1105253RD
This is a crank pulley for an upright motor.
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 211105271CRC
These flywheels have been reconditioned and are sold on an exchange basis. This is a rare flywheel so I do not have any in stock. You will need to send in yours first and we can recondition it.
Application:Part #: 111105719A
Rod Bearings .30
Application:Part #: 1105305R
This is a large thrust surfaced gland nut made out of chromoly.
Application:
This is a stock pulley that has been chromed.
