Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are the rear lenses for the tail light, brake light and turn signal light.
These are the rear lenses for the tail light, brake light and turn signal light. They are held in place with two to three Phillips screws.
Ghia: 60-69
No customer reviews for the moment.
Part #: 311198573RK
This kit comes with the gaskets, the needle and seat, and accelerator pump diaphragm for the carburetor..
Application:Part #: 1101026AL92
Aluminum "Super Case" for 92mm Bore
Application:Part #: 111801046K
The heater channel carries heat form the heater boxes to the front of the car.
Application:Part #: 151863123
These are the interior panels.
Application:Part #: 2847103SS
This makes the rear window pop out like the front windows.
Application:Part #: 113501753
Z-Bar Guide, Operating Arm, each
Application:Part #: 151871391A
Convertible Top Catch
Application:Part #: 6721550A
HD Throttle Cable 16'
Application:Part #: 6513401
This boss comes in real handy when making upper shock mounts or putting on rear lower shock mounts in IRS cars..
Application:Part #: 6511246
These grommets go on the spring plates in the torsion housing of your car.
Application:Part #: 1117100
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1105178
This crankshaft is made of E4340 chromoly forging, one of the strongest metals known to man.
Application:Part #: 111198029
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 151871189E
The top staples to this front bow.
Application:Part #: 211609701C
Emergency Brake Cable (3330mm/131.1")
Application:Part #: 113853615
These are three little plastic pieces that push into the front hood to hold the emblem in place.
Application:
These are the rear lenses for the tail light, brake light and turn signal light.