Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are a nice unit and much better for off road cars than the cast aluminum breather box.
These are a nice unit and much better for off road cars than the cast aluminum breather box. Great for sand cars.
Race/Off-Road: All
No customer reviews for the moment.
Part #: 1117099
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1117005
This adapter is used to mount an oil filter either by itself or in line with an oil cooler.
Application:Part #: 111115495
This is more of a bolt than a nut.
Application:Part #: 111115485
It caps the hole you are aiming at while pouring oil over everything else.
Application:Part #: 1115183BL
This plate is made out of a solid piece of aluminum. Blue
Application:Part #: 1115455
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily.
Application:Part #: 1115467
This is a breather box that will give excess "blow by" a place to go.
Application:Part #: 6115453
This stock oil filler and cap has been chromed.
Application:Part #: 1115349
This plate will block off the type 3 oil filler hole in a universal case.
Application:Part #: 1117103ALM
These fittings are used for the stainless steel hose.
Application:Part #: 111115107AKS
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1117023FAN
This is the same as the mesa cooler but with a fan mounted to it.
Application:Part #: 1115450PL
The oil filler extension screws into the generator stand and comes with a fitting to vent the crankcase.
Application:Part #: 1115422
These stronger springs were designed to boost the oil pressure in your motor.
Application:Part #: 1115141
This oil pump cover comes with a threaded boss.
Application:Part #: 1115193
This plug for the bottom of the sump plate has a magnet in it.
Application:
These are a nice unit and much better for off road cars than the cast aluminum breather box.
