Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The two outside valves in the head are the exhaust valves, they let the burned fuel out of the head.
The two outside valves in the head are the exhaust valves, they let the burned fuel out of the head. We recommend that you replace them when you have a valve job done. The old valves can get brittle due to the heat and break off. On stainless steel valves, make sure you grind the keepers so that they don't touch each other when put in place. Stainless steel valves are soft and if you don't grind the keepers the valves will eventually pull through.
Bus (Type 2): 72-79
Vanagon: 80-83
No customer reviews for the moment.
Part #: 211863113
These are the interior panels.
Application:Part #: 1251008H
1 5/8" Merged Flanged Header with Stinger (No Heater Boxes Included)
Application:Part #: 211837235BK
This plastic "donut" goes under the window crank or door handle to prevent the door panel from getting ripped.
Application:Part #: 1115450BC
Replacement Oil Cap Billet Polished
Application:Part #: 141857513A
Fender Mount Mirror, Left or Right
Application:Part #: 111881401
Like the door panels, seat covers are a long subject; so here's the basics.
Application:Part #: 6707304KIT
Double Tube Rear Bumper Shock Tower Mount, Kit
Application:Offroad; All
Part #: 211711197
This bushing wraps around the front shift rod.
Application:Part #: 1117099
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 111115451
This rubber collar goes around the dump tube that comes from the generator stand.
Application:Part #: 043101129
This is the washer used under the nuts on cases that use an o-ring on the center main studs.
Application:Part #: 211611301CGR
Master cylinder reservoir
Application:Bus (Type 2); 50-65
Offroad/Drag; All
Part #: 1601124STL
Steel Porsche Style Alloy Lug Nuts, Set of 5, M14-1.5 x 1 1/4" thread
Application:Part #: 113941541GY
These are the knobs for the wiper and light switches on the dash.
Application:Part #: 311201219A
This hose goes from the filler neck to the tank.
Application:
The two outside valves in the head are the exhaust valves, they let the burned fuel out of the head.