Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are the short pieces that fit under the big cylinder tin towards the crank pulley.
These are the short pieces that fit under the big cylinder tin towards the crank pulley. They hold the large cylinder tins in place as well as deflecting air down and around the #2 and #4 cylinders.
Bug (Type 1): 1500-1600
Bus (Type 2): 1500-1600
Ghia: 1500-1600
Thing: 1500-1600
No customer reviews for the moment.
Part #: N115244
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 1119303BK
These cylinder head tins sit under the fan shroud.
Application:Part #: 1119302BK
These cylinder head tins sit under the fan shroud.
Application:Part #: 1119528BK
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 1119027BK
This small fan shroud came on the 36hp motor.
Application:Part #: 1119025CH
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 1119026BK
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 113119317
These are also known as the "forget-me-nots".
Application:Part #: 131119357
These are the short pieces that fit under the big cylinder tin towards the crank pulley.
Application:Part #: 1119526CH
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 043119352
Heater Channel Tin Lower Right
Application:Part #: 1119352BK
These three pieces of tin go from the heater boxes to the case.
Application:Part #: 1119028BK
This small fan shroud came on the 36hp motor.
Application:Part #: 1119516BK
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
Application:Part #: 1119023
This spacer kit uses 1 1/4" thick aluminum spacers to close the gap between the fan shroud and the cylinder tins where the sheet metal screw attaches.
Application:Part #: 1119527CH
This tin goes from one piece of cylinder tin to the other.
Application:
These are the short pieces that fit under the big cylinder tin towards the crank pulley.
