Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The two inside valves in the head are the intake valves, which let the gas into the combustion chamber.
The two inside valves in the head are the intake valves, which let the gas into the combustion chamber. These don't normally need to be replaced unless they have been ground too far or too many times. On stainless steel valves, make sure you grind the keepers so that they don't touch each other when they're put in place. Stainless steel valves are soft and if you don't grind the keepers they will eventually pull through.
Bug (Type 1): 66, 75-79
Ghia: 66
No customer reviews for the moment.
Part #: 1117698
When mounting the oil cooler above the transmission on a Bug, Type 3, Ghia, Thing, or Off Road car you can use these rubber mounted studs.
Application:Part #: 6601155
These caps are made to dress up your wheels..
Application:Part #: 111701061MHD
This is one entire half of the pan.
Application:Part #: 112950506IDF
Throttle Shaft Nut for 40/44 HPMX (EMPI), 40-48 IDF (Weber)
Application:Part #: 111899117
Body Pad (2), Under Rear Seat
Application:Part #: 1117106ALF
Hose End 120 Degree No. 8
Application:Part #: 131405670
This nut holds the front drum on.
Application:Part #: 311115329B
This is the rubber sleeve that connects the oil filler to the motor.
Application:Part #: 30048
This little box tells the Alternator what to do.
Application:Part #: 143863010
These are the interior panels.
Application:Part #: 111941261A
These are a sealed unit.
Application:Part #: 365853355
Rear Window Trim, includes Clips
Application:Part #: 6498051A
EMPI Chromoly Link Pins 5/8", Set of 4
Application:Part #: 021256092T
These are your source of heat.
Application:
The two inside valves in the head are the intake valves, which let the gas into the combustion chamber.