Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This crankshaft is made of E4340 chromoly forging, one of the strongest metals known to man.
This crankshaft is made of E4340 chromoly forging, one of the strongest metals known to man. These cranks are fully balanced, magnafluxed and micro-polished. Machine work to the case will be required. It has been our experience that if you are going to run an 82mm stroke crank you should run longer rods that are 5.5" in length.
Bug (Type 1): 1600
Ghia: 1600
Thing: 1600
Race/Off-Road: 1600
No customer reviews for the moment.
Part #: 1105261
Adjustable Timing Pointer
Application:Part #: 1105401
I-Beam Rod, 5.394" VW Journal (Empi 3/8" Rod Bolts) Set of 4
Application:Part #: 1105169F
Forged 69mm Counter Weighted Crankshaft
Application:Part #: 1105253BL
This is a crank pulley for an upright motor.
Application:Part #: 1903108PL
EMPI Serpentine Belt System
Application:Part #: 111105259
The bolt and washer that holds the crankshaft pulley on.
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 111198461BR
The crankshaft rides in the main bearing.
Application:Part #: 1105273CH
Lightened 12 lb.
Application:Part #: 1903108RD
EMPI Serpentine Belt System Red
Application:Part #: 111105271RC
These flywheels have been reconditioned and are sold on an exchange basis.
Application:Part #: 1105169
These cranks are made from stock German core cranks.
Application:Part #: 1105219
This spacer goes between the steel cam gear and the brass distributor gear on the crank.
Application:Part #: 111105223
This brass gear goes on the crank to turn the distributor drive shaft.
Application:Part #: 111105233
This gear matches up with the brass gear that is on the crank.
Application:Part #: 1105251ALRD
Aluminum Stock Crankshaft Pulley Red
Application:
This crankshaft is made of E4340 chromoly forging, one of the strongest metals known to man.
