Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The oil pump is the heart of the engine, so it is very important to choose the right one.
The oil pump is the heart of the engine, so it is very important to choose the right one. When ordering a pump you will need to know if your case is a single or dual relief, if you have a dished or a flat cam and if you want a standard or heavy duty pump. Remember that you can only pump so much oil through a certain size hole, so be careful in ordering a heavy duty pump. We feel that any pump with gears larger than 30mm is a waste of money. Note: When replacing a pump make sure you use four new sealing nuts.
Bug (Type 1): 61-67
Bus (Type 2): 60-67
Type 3: 62-67
Ghia: 61-67
No customer reviews for the moment.
Part #: 1117102
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 113115193
This is the bolt that goes in the plate on the bottom of the motor.
Application:Part #: 1117024FAN
This is the same as the mesa cooler but with a fan mounted to it.
Application:Part #: 1115431
This hex drive replacement plug is for the case relief spring(s).
Application:Part #: 1115449RD
Replacement Oil Cap Billet Red
Application:Part #: JC22660
Jaycee Street Oil Filter Bracket, Black
Application:Part #: 1115449OIL
Replacement Oil Cap Billet "OIL"
Application:Part #: 1115182
A stock sump plate that has been chromed..
Application:Part #: 1115467
This is a breather box that will give excess "blow by" a place to go.
Application:Part #: 1117022
Mesa coolers are the state of the art oil coolers.
Application:Part #: 111115485
It caps the hole you are aiming at while pouring oil over everything else.
Application:Part #: 1115421
These stronger springs were designed to boost the oil pressure in your motor.
Application:Part #: N110623
Some of the more common nuts you might need..
Application:Part #: 1115458
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily.
Application:Part #: 113198031
These gaskets are used on the sump plates of the engine.
Application:Part #: 111198029
This stock oil cooler cools the hot oil coming from the engine.
Application:
The oil pump is the heart of the engine, so it is very important to choose the right one.
