Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:These seals go underneath the front hood handle. You'll need to unbolt the handle in order to install them. On Bugs 68-79 the seals from the factory were clear, but we like the black seals.
Bug (Type 1): 68-79
No customer reviews for the moment.
Part #: 211703131
This support goes from the main frame out to the inner rocker.
Application:Part #: 311105101B10
These are used cranks with reground rod and main journals.
Application:Part #: 113837639AHD
These locks keep the vent wing closed, therefore a must, but they're a pain to replace.
Application:Part #: 1847100CWG
This Bug Safari window is constructed as a dual-channel, mild-steel frame with a chrome finish that accepts 3/16" safety glass and an outer lip seal. This chrome options arrives pre-assembled
Application:Part #: 1857100
This durable, plastic box replaces the stock cardboard glovebox.
Application:Part #: N102281
This is a list of the most common bolts used on a car..
Application:Part #: 211845124B
Safari Inner Seal (Shim Roll) per foot. Each Front Safari window takes 7 feet or 14 feet per pair.
Application:Part #: 6711177CL
A great shifter for sand cars.
Application:Part #: 2615107B
This kit allows you way to bolt on disc brakes to the front of your king and link pin front end.
Application:Part #: 3129034
We have found this kit to be a good, cheap dual carb kit for a stock motor.
Application:Part #: 6611795
A two pound residual pressure valve is recommended for disc brake applications while a 10 pound valve is mostly used on drum brake applications..
Application:Part #: 141564914SR
These slick steering wheels have black hand-stitched, leather-grained vinyl grips with black or silver anodized aluminum spokes with machined racing holes..
Application:Part #: 131405361F
These joints are located in the ends of the control arms.
Application:Part #: 022109612D
The two outside valves in the head are the exhaust valves, they let the burned fuel out of the head.
Application:Part #: 211813356IX
This is a repair panel for the rear corner.
Application:Part #: 1721507BIL
This gas pedal comes with a roller on the end of it.
Application: