Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Generator Pulley Nut
Generator Pulley Nut
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Offroad/Race: All
No customer reviews for the moment.
Part #: 113129034KIT
This adapter is used when you want to put a 30PICT carb on a dual port manifold. Will only work with a round bowl style carb. It will NOT work with a square bowl carb.
Application:Part #: 113609614A
Parking Brake Lever, Right
Application:Part #: 111255483
These are the vents that clip into the dash.
Application:Part #: 111405691
This is the cap that goes on the outside of the drum; covering up your bearing.
Application:Part #: 1105721
Chevy Rod Bearings .010
Application:Part #: 6707304
These bumpers are made for Baja Bugs.
Application:Part #: ECP25B
ECP part numbers are for the regular crimp style electrical ends.
Application:Part #: N120112
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 211971225C
This cable goes from the battery to the starter.
Application:Part #: 6601042
Offroad Wheel, 16"x4", 5x205 bolt pattern
Application:Part #: 151845521DAM
This seal is for the rear window. This is for a CONVERTIBLE ONLY.
Application:Part #: T1198088
This cheap tool allows you to get the cylinder barrels over the pistons and rings.
Application:Part #: 1080124
Underdash Gauge Panel
Application:Part #: 1127105ALM
This is stainless steel braided fuel line.
Application:Part #: T1115107
This tool pulls out the oil pump with out marring the case like pry bars do..
Application:Part #: 111198157B
Rings on the pistons are there to eliminate "blow-by".
Application:
Generator Pulley Nut